VOLVO
CEM-B10A811 - Right Main Beam Shutter. General Electrical Failures. Circuit short to ground
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Was bedeutet der Fehlercode?
The central electronic module (CEM) switches on the high beam and uses a solenoid to move the shield that limits the bi-xenon lamp to dipped beam. The fault shows that the current to the solenoid supply is too high, which points to a short to ground. The fault is checked when the high beam is activated.
Mögliche Ursachen
- The supply circuit to the shield solenoid of the bi-xenon light is shorted to ground
Was Sie tun können
- 1Read off and note the code, clear it and switch on the high beam to see whether the fault returns
- 2Check that the fuses for the high beam are intact
- 3Check that the connectors at the right headlight are fully engaged and not corroded, and that the cable is not chafed
- 4Use a multimeter (ignition off, connector unplugged) to check that the supply wire to the right headlight solenoid has no connection to ground
- 5If you have a diagnostic tool, activate the high beam with the tool and check whether the right headlight responds
- 6If the fault remains, have a workshop check the headlight and the wiring
Symptome, die Sie bemerken können2
- The high beam does not work
- Automatic high beam dimming (AHB) does not work
Was der Fehler beeinflussen kann1
- The high beam output is reduced
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.