VOLVO
CEM-B10BB01 - Front/Rear Axle Level Sensor. General Failure Information. General electrical failure
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Was bedeutet der Fehlercode?
The central electronic module (CEM) supplies the front and rear level sensors, which measure the height of the car and are used to adjust the headlights. The fault shows that the supply to the sensors is shorted to voltage or ground. The sensors share a supply inside the CEM, so the fault can affect both.
Mögliche Ursachen
- The supply to the front level sensor is shorted to voltage or ground
- The supply to the rear level sensor is shorted to voltage or ground
Was Sie tun können
- 1Read off and note the code, clear it and check whether it returns with the engine running
- 2Check that the fuses for the headlight level control are intact
- 3Check that the connectors at the front and rear level sensors are fully engaged and not corroded
- 4Use a multimeter (ignition off, connectors unplugged) to check that the supply wires have no connection to ground or battery positive
- 5If you have a diagnostic tool, read the sensor values in live data and check that they change when the front and rear of the car are pressed down and released
- 6If the fault remains, have a workshop check the sensors and the wiring
Symptome, die Sie bemerken können4
- Headlight side adjustment does not follow the steering wheel
- Headlight height adjustment does not work or is set wrongly
- Text message and warning symbol in the display
- Automatic high beam dimming (AHB) does not work
Was der Fehler beeinflussen kann2
- The headlight beam stays at a fixed level
- Side adjustment stays fixed straight ahead
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.