VOLVO
CEM-B10D794 - PATS Key. Component Failures. Unexpected operation
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
Once the remote key has been put into the ignition lock, the ignition lock control module tries to identify the key by reading its ID from the transponder. When that read-out fails to finish in time, the module reports that the key does not respond and the code is stored. The fault shows up as the starter motor not working and a message in the text display.
Mögliche Ursachen
- The remote key does not respond to the control module's request
- Another remote key or transponder nearby disturbs the communication
- Something, for example a finger, has been inserted into the starter module
Was Sie tun können
- 1Check that no other key or transponder is near the ignition lock when you start, for example another key bunch
- 2Check that nothing has been inserted into the starter module
- 3Try starting with another key that belongs to the car. If it works, the key that does not respond is probably the one at fault
- 4If the fault follows one key: have a workshop reprogram that key
- 5If none of the keys work: have a workshop with diagnostic equipment check the ignition lock control module
Symptome, die Sie bemerken können2
- Starter motor does not operate
- Message in the text display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.