Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    CEM-B10EA14
    VOLVO

    CEM-B10EA14 - Positive temperature coefficient heater. General Electrical Failures. Circuit short to ground or open

    System

    Zentralelektronik (CEM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    6 Modelle

    S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (6)
    • Volvo S80 (2007–)2007–2010
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V70 (2008–)2008–2010
    • Volvo XC60 (2009–)2009–2010
    • Volvo XC70 (2008–)2008–2010

    Was bedeutet der Fehlercode?

    The additional heater (PTC element) is fitted to diesel cars in some markets and is controlled by the CEM through an output. The code is stored when the signal from the output is too low, for example when no signal is present at all. Cabin heating then becomes poor, because the additional heater is not getting the control it needs.

    Mögliche Ursachen

    • The signal cable is short-circuited to ground
    • Open circuit in the signal cable

    Was Sie tun können

    1. 1Check that the relevant fuses are intact. Their locations are in the owner's manual or on the fuse box cover
    2. 2Check that the connectors in the cable to the additional heater are secure and clean
    3. 3Look for chafing and pinch damage on the signal cable
    4. 4Use a multimeter to check that the cable has no contact with ground (the body) and is not broken
    5. 5If you have a diagnostic tool: activate the additional heater and check that the air becomes warmer
    6. 6If the fault returns, have a workshop with diagnostic equipment check the PTC element and the control module

    Symptome, die Sie bemerken können2

    • Poor heating in the cabin
    • Heater does not work

    Was der Fehler beeinflussen kann2

    • The function switches off permanently after 100 driving cycles in which the fault has been detected
    • Clearing the fault codes resets the output

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.