Was bedeutet der Fehlercode CEM-B10F196?

Diagnose und Fehlercodedefinition für CEM-B10F196 (Volvo S80 (2007–), Volvo V70 (2008–), Volvo XC60 (2009–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

CEM-B10F196 - Key in switch. Component Failures. Component internal failure

System

Zentralelektronik (CEM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

4 Modelle

S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Modelle nach Baujahr und Motor anzeigen (4)

Was bedeutet der Fehlercode?

The CEM monitors the link to the ignition lock control module (SCU). The key-in switch is expected to close when the remote key goes in, but the SCU cannot confirm the key is in the ignition within the set time. The fault comes from inside the SCU, and the engine then does not start.

Mögliche Ursachen

A fault inside the ignition lock control module (SCU)

Was Sie tun können

1Note the code, clear it and start the car several times to see whether the fault returns
2If you have a diagnostic tool: check in live data that the key-in switch status changes when the remote key is inserted and removed
3Check that the relevant fuses are intact. Their locations are in the owner's manual or on the fuse box cover
4If the fault returns, have a workshop reprogram or replace the ignition lock control module

Symptome, die Sie bemerken können1

Engine does not start

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.