Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    CEM-B10F401
    VOLVO

    CEM-B10F401 - Right front position light. General Failure Information. No sub type information

    System

    Zentralelektronik (CEM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    4 Modelle

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (4)
    • Volvo S80 (2007–)2007–2010
    • Volvo V70 (2008–)2008–2010
    • Volvo XC60 (2009–)2009–2010
    • Volvo XC70 (2008–)2008–2010

    Was bedeutet der Fehlercode?

    The CEM feeds the right front position light directly from an output. The code is stored when the supply cable has a break or is shorted to ground. The right front position light then does not work.

    Mögliche Ursachen

    • The supply cable is short-circuited to ground
    • Open circuit in the supply cable

    Was Sie tun können

    1. 1Check that the relevant fuses are intact. Their locations are in the owner's manual or on the fuse box cover
    2. 2Check that the lamp is secure and that the connectors in the lamp housing are clean and dry
    3. 3Look for chafing and pinch damage on the supply cable to the right front position light
    4. 4Use a multimeter to check that the supply cable has no contact with ground (the body)
    5. 5Use a multimeter to check that the supply cable is not broken
    6. 6If the fault returns, have a workshop with diagnostic equipment check the control module output and the wiring

    Symptome, die Sie bemerken können1

    • Right front position light does not work

    Was der Fehler beeinflussen kann3

    • The output switches off in the driving cycle in which the fault is detected
    • If the fault remains, the output switches off permanently after 100 driving cycles
    • Clearing the fault codes and starting a new driving cycle resets the output

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.