VOLVO
CEM-B110877 - Driver door central locking motor. Mechanical Failures. Commanded position not reachable
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The CEM controls locking and unlocking of the door lock motors and learns their status from switches in the lock units. The code is stored when the driver door lock motor has not reached its locked or unlocked position after two attempts. Central locking then does not work for the driver door. The fault only needs following up if central locking really gives you trouble.
Mögliche Ursachen
- Damaged switch that reports the lock motor status
- The lock motor is stuck
Was Sie tun können
- 1If you have a diagnostic tool: read the fault codes in the driver and passenger door modules (DDM and PDM) before going further
- 2Lock and unlock the car with the remote or the central locking button. Pause between attempts, as the lock motors can overheat and stop for a while
- 3If you have a diagnostic tool: check in live data that the lock status for the driver door changes when the door is locked and unlocked
- 4Check that the driver door lock moves freely and is not stiff or blocked by dirt or mechanical resistance
- 5If the fault returns, have a workshop check the wiring and replace the lock unit if needed, since the door trim has to come off
Symptome, die Sie bemerken können2
- Driver door does not lock or unlock with the central locking
- Central locking does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.