VOLVO
CEM-B111513 - High mounted stop lamp control. General Electrical Failures. Circuit open
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The CEM feeds the high mounted brake light directly from an output. The code is stored when the supply cable has a break, and the high mounted brake light then does not work.
Mögliche Ursachen
- Break in the supply cable
Was Sie tun können
- 1Check that the brake lights work by having someone watch them while you press the brake. Brake lights matter for road safety, so fix the fault promptly
- 2Check that the relevant fuses are intact. Their locations are in the owner's manual or on the fuse box cover
- 3Use a multimeter to check that the supply cable is not broken, for example by checking continuity between two contact points
- 4Look for chafing and pinch damage on the cable, especially where it may have been bent or clamped
- 5If the fault returns, have a workshop with diagnostic equipment check the wiring and the control module output
Symptome, die Sie bemerken können1
- Tail light or brake light does not work
Was der Fehler beeinflussen kann2
- After 100 driving cycles with the fault, the function switches off permanently
- Clearing the fault codes resets the output
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.