VOLVO
CEM-B111515 - High mounted stop lamp control. General Electrical Failures. Circuit short to battery or open
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleV40 (2013–), V40 Cross Country (2013–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The high mounted brake light is fed directly from an output on the CEM. The code is stored when the supply cable has a break or is shorted to supply voltage. The brake light then does not work at that height.
Mögliche Ursachen
- A break or short to supply voltage in the cable
Was Sie tun können
- 1Check that the brake lights work by having someone watch them while you press the brake. Brake lights matter for road safety, so fix the fault promptly
- 2Check that the relevant fuses are intact. Their locations are in the owner's manual or on the fuse box cover
- 3Use a multimeter to check whether the supply cable has voltage when the brake is not pressed
- 4Use a multimeter to check that the cable is not broken, for example by checking continuity between two contact points
- 5If the fault returns, have a workshop with diagnostic equipment check the wiring and the control module output
Symptome, die Sie bemerken können1
- Tail light or brake light does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.