Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    CEM-B11D186
    VOLVO

    CEM-B11D186 - LIN Bus "C". Bus Signal / Message Failures. Signal invalid

    System

    Zentralelektronik (CEM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    2 Modelle

    V40 (2013–), V40 Cross Country (2013–)

    Modelle nach Baujahr und Motor anzeigen (2)
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015

    Was bedeutet der Fehlercode?

    The Central Electronic Module (CEM) shares a LIN bus with the start lock antenna unit (IAU) and the steering column lock control module (SCL). The fault is stored when messages sent on the bus become faulty.

    Mögliche Ursachen

    • Contact resistance, oxidation or poor contact in the connector terminals and connections
    • Damaged start lock antenna unit (IAU)
    • Damaged steering column lock control module (SCL)

    Was Sie tun können

    1. 1Check that the battery is charged and that the fuses are intact
    2. 2Check the connectors at the start lock and the steering lock: oxidised or loose connectors should be cleaned and pressed in
    3. 3Check the LIN wire between the start lock and the steering lock for chafing, pinch damage and loose connectors
    4. 4Use a multimeter to check that the wire is not short-circuited to earth or battery voltage
    5. 5If the fault remains, have a workshop with diagnostic equipment check the start lock antenna unit and the steering lock

    Symptome, die Sie bemerken können4

    • The engine does not start, or the starter does not turn over
    • When starting is attempted there is either a clicking sound or no sound at all
    • The steering lock does not work
    • The fault may be constant or come and go

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.