Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    CEM-B139F01
    VOLVO

    CEM-B139F01 - Main Battery Relay. General Failure Information. General electrical failure

    System

    Zentralelektronik (CEM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    9 Modelle

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (9)
    • Volvo S60 (2011–)2011–2015
    • Volvo S80 (2007–)2011–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2011–2015
    • Volvo XC60 (2009–)2011–2015
    • Volvo XC70 (2008–)2011–2015

    Was bedeutet der Fehlercode?

    This fault code only applies to cars with automatic engine start/stop. During a restart after an auto stop, the main battery relay isolates the battery and starter circuit from the remaining electrics, so the brief voltage dip from the starter does not reach the other systems. The CEM monitors the relay, and the fault is stored when the value is wrong for too long.

    Mögliche Ursachen

    • The main battery relay has stuck in the open position
    • Open circuit in the wire between the main battery and the main battery relay
    • Open circuit in the wire between the main battery relay and the battery main fuse box

    Was Sie tun können

    1. 1Check that the fuses are intact, especially those in the battery main fuse box
    2. 2Check that the main battery is fully charged and that the cables from the battery to the relay are intact and clean
    3. 3Check the connectors at the battery, at the relay and in the main fuse box: loose or corroded connectors should be cleaned and pressed in
    4. 4If you have a diagnostic tool, check in live data whether the main battery relay shows an open state when the engine is started
    5. 5If no fault is found in the wiring, have a workshop check and if needed replace the main battery relay

    Symptome, die Sie bemerken können2

    • The automatic start/stop function does not work while driving
    • The automatic start/stop function does not work at idle

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.