VOLVO
CEM-B1D3819 - Front wiper motor. General Electrical Failures. Circuit current above threshold
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The control module (CEM) exchanges messages with the windscreen wiper module (WMM). The code is set when the wiper motor draws too much current, which is most often because the wipers are stuck or running stiffly, for instance because of snow or dry glass.
Mögliche Ursachen
- The windscreen wiper is stuck or running stiffly, for instance because of snow or dry glass
Was Sie tun können
- 1Read and clear the code, then run the wipers and listen for whether they run stiffly or stop
- 2Clear snow and ice from the wiper blades and around the wiper arms before driving
- 3Check that the wiper blades and arms move freely and are not bent
- 4Check that the wiper blades are not frozen to the glass or worn
- 5If the fault returns, have a workshop with diagnostic equipment check the wiper motor
Symptome, die Sie bemerken können2
- Automatic wipers with the rain sensor do not work
- The windscreen wiper does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.