Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    CEM-C111B11
    VOLVO

    CEM-C111B11 - Left Stop Lamp. General Electrical Failures. Circuit short to ground

    System

    Zentralelektronik (CEM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    9 Modelle

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (9)
    • Volvo S60 (2011–)2011–2015
    • Volvo S80 (2007–)2010–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2010–2015
    • Volvo XC60 (2009–)2010–2015
    • Volvo XC70 (2008–)2010–2015

    Was bedeutet der Fehlercode?

    The central electronic module (CEM) feeds the left brake light directly from an output. On V70 and XC70 one output feeds both brake lights, so both can be affected. The code is set when the signal is too low, which can be caused by poor contact or a short to ground.

    Mögliche Ursachen

    • Contact resistance, oxidation or play in the connections
    • The signal wire is shorted to ground

    Was Sie tun können

    1. 1Read and clear the code, then press the brake pedal and see whether the left brake light comes on
    2. 2Check that the bulb in the left brake light is intact
    3. 3Check the brake light fuse; on the V70 and XC70 the right brake light can also be affected, so check it too
    4. 4Check the connections to the left brake light for oxidation and play
    5. 5Use a multimeter to check that the signal wire has no contact with ground (the bodywork); otherwise have a workshop check the module output

    Symptome, die Sie bemerken können3

    • The left brake light does not work
    • Yellow warning symbol and text message in the display
    • The bulb failure warning in the instruments comes on or behaves abnormally

    Was der Fehler beeinflussen kann3

    • The function switches off during the driving cycle in which the fault is detected
    • After repeated driving cycles with the fault, the function is switched off permanently
    • Clearing the fault codes and starting a new driving cycle resets the output

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.