Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    CEM-DE6E
    VOLVO

    CEM-DE6E - Communication with the transmission control module (TCM). Signal missing

    System

    Zentralelektronik (CEM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    5 Modelle

    C30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Modelle nach Baujahr und Motor anzeigen (5)
    • Volvo C30 (2007–2013)2007–2013
    • Volvo C30 Electric (2011–2013)2011–2013
    • Volvo C70 (2006–2013)2006–2013
    • Volvo S40 (2004–2013)2004–2012
    • Volvo V50 (2004–2013)2004–2012

    Was bedeutet der Fehlercode?

    The CEM has lost contact with the transmission control module (TCM). As a result some gear changes do not happen, the malfunction indicator may light and a message can appear in the display. The fault is most often caused by supply, earth or a connector at the TCM.

    Mögliche Ursachen

    • No supply to the TCM
    • Open circuit in the earth wire to the TCM
    • Contact resistance in the connections
    • Open circuit in the LS-CAN wires to the TCM
    • The TCM does not suit the car, for example a used module with other software or hardware

    Was Sie tun können

    1. 1Switch the ignition on and check that the light on the gear selector panel comes on. If it does not, the TCM probably has no supply
    2. 2Check the TCM fuse in the engine bay fuse box and the TCM fuse in the CEM. If one has blown, check its circuit for a short to earth before replacing it
    3. 3Use a multimeter to check that the wires from the fuse box and from the CEM to the TCM have no break
    4. 4Check the TCM earth wire and earth point for play and oxidation
    5. 5With a diagnostic tool, read the TCM ID. If it reads, the communication is probably fine and the fault may be intermittent
    6. 6After the repair, clear the fault code and road test to check that gear changes work and the fault does not return

    Symptome, die Sie bemerken können3

    • Gear changes do not happen
    • The malfunction indicator lamp is lit
    • A message appears in the text display

    Was der Fehler beeinflussen kann1

    • A substitute gear is engaged instead of the selected gear

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.