VOLVO
CEM-P060500 - Internal Control Module Read Only Memory (ROM) Error. General Failure Information. No sub type information
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Was bedeutet der Fehlercode?
The CEM has registered an internal fault in its software, for example after a failed software upload. The engine may then not start. The fault is normally put right with new software or by replacing the module, and that is done by a workshop.
Mögliche Ursachen
- Faulty software loaded in the CEM
Was Sie tun können
- 1Clear the fault code and start the car. If the fault returns straight away, it is an active software fault
- 2Tell the workshop if a software update was recently interrupted or failed, since that is an important clue
- 3Have a workshop read the fault codes and reload the CEM with the latest software. Programming is a workshop task
- 4If reprogramming has no effect, the CEM must be replaced, which is also a workshop task
- 5Make sure the battery is well charged during the upload, since low voltage can interrupt it
- 6After the work, check that the engine starts and that the fault code does not return
Symptome, die Sie bemerken können1
- The engine does not start
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.