VOLVO
CEM-P167400 - Control Module Software Corrupted. General Failure Information. No sub type information
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Was bedeutet der Fehlercode?
The CEM has registered a fault in its software. The code is generic and does not say more precisely what type of fault it is. The engine may then not start, and the gauges, instrument lighting and indicators can also be affected. A workshop fixes the fault with new software.
Mögliche Ursachen
- Software fault in the CEM
Was Sie tun können
- 1Clear the fault code and start the car. If the fault returns straight away, it is an active software fault
- 2Tell the workshop if a software update was recently interrupted or failed
- 3Have a workshop read the fault codes and reload the CEM with the latest software. Programming is a workshop task
- 4Make sure the battery is well charged during the reload, since low voltage can interrupt it
- 5After the reload, check that the engine starts and the gauges work
- 6If the fault remains after the reload, the CEM must be replaced, which is also a workshop task
Symptome, die Sie bemerken können5
- The engine does not start
- No gauges work
- The instrument lighting does not work
- The turn signals do not work
- Reduced performance
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.