VOLVO
CEM-U023500 - Lost Communication With Closing Velocity Module (CVM). Bus Signal / Message Failures. Missing message
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
4 ModelleS60 (2011–), V60 (2011–), V60 Cross Country (2015–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The fault code means that the control module storing the fault has missed the expected messages from the closing velocity module (CVM). The CVM supports the active safety and City Safety functions, which can brake when a collision is likely, so those functions may not work. The fault concerns the communication and not one individual control module.
Mögliche Ursachen
- The CVM receives no supply voltage
- Broken ground wire to the CVM
- Poor contact in the connections
- Open or shorted CAN wiring
- A module not intended for the car, such as a used unit with other software or hardware
Was Sie tun können
- 1Check the power supply and ground point to the CVM and confirm the connectors are secure
- 2Check the CVM connector for contact resistance, oxidation and looseness
- 3Check the ground wire for breaks or a short to voltage
- 4Safety: City Safety can affect braking. Have a workshop check the system with diagnostic equipment. Replace the CEM only if testing shows it is damaged
Symptome, die Sie bemerken können2
- Front monitoring, active safety and City Safety do not work
- City Safety does not intervene when needed
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.