VOLVO
CEM-U026400 - Lost Communication With Parking Assistance Camera. General Failure Information. No sub type information
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Was bedeutet der Fehlercode?
The fault code means that the control module storing the fault has no working link to the parking camera control module (PAC), or the link is disturbed. The parking camera then does not work. The fault concerns the network rather than one individual control module.
Mögliche Ursachen
- No voltage supply to the parking camera module (PAC)
- Broken ground wire to the PAC
- Poor contact in the connections
- Open or shorted CAN wiring
- A module not intended for the car, such as a used unit with other software or hardware
Was Sie tun können
- 1Check that the parking camera fuse is intact
- 2Check the cables and connections to the PAC for contact resistance or oxidation
- 3Check the power cable to the PAC for shorts and breaks
- 4Check the ground wire for breaks or a short to voltage, and the ground point for play and oxidation
Symptome, die Sie bemerken können1
- Park assist camera does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.