VOLVO
CEM-U201741 - Control Module Software #2. System Internal Failures. General checksum failure
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The central electronic module (CEM) has found an internal software fault, a checksum that does not match. The fault is stored while the ignition is on and the module has power. It can stop the engine from starting, make the car hesitate, and cause several gauges and comfort functions to stop working.
Mögliche Ursachen
- Faulty software installed in the central electronic module (CEM)
Was Sie tun können
- 1Read and note the code, clear it, then road test the car to see whether it comes back
- 2Check that the battery is charged and that the battery terminals are tight, since low voltage can disturb the module
- 3Has the car recently had new software or an update that was interrupted? Tell the workshop
- 4If the fault returns, have a workshop reload the module software with the latest version
Symptome, die Sie bemerken können5
- The engine does not start
- The car hesitates, surges or feels jerky when driving
- The cruise control cannot be engaged
- Gauges such as the speedometer or coolant temperature gauge show wrong readings or do not work
- Central locking or climate control does not work
Was der Fehler beeinflussen kann1
- The functions of the central electronic module (CEM) are restricted
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.