VOLVO
CEM-U210848 - Adaptive Cruise Control. System Internal Failures. Supervision software failure
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleV40 (2013–), V40 Cross Country (2013–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
On the V40, the CEM constantly monitors the adaptive cruise control system. The fault is stored while the engine runs when the signal from FSM, ECM or BCM is wrong. The code points to another module as the cause, and cruise control cannot be engaged while the fault is present.
Mögliche Ursachen
- The fault most likely sits in the sending unit, for example the front sensing unit (FSM), the engine ECM or the brake BCM
Was Sie tun können
- 1If you have a diagnostic tool, read the codes in the forward sensing module, engine control module and brake control module and clear those first
- 2Clear the code in the CEM once the other faults are dealt with, then road test to see whether it returns
- 3While the fault is present cruise control cannot be used, so drive with full attention and keep your own distance
- 4If the fault returns after the other codes are cleared, have a workshop with diagnostic equipment check the central electronic module (CEM)
Symptome, die Sie bemerken können2
- Warning symbol and text message in the display
- Cruise control cannot be engaged
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.