VOLVO
CEM-U300092 - Control Module. Component Failures. Performance or incorrect operation
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleV40 (2013–), V40 Cross Country (2013–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
On the V40, the CEM has rebooted too often within a single operating cycle. The code may be caused by low battery voltage at start-up, but also by a faulty module. Symptoms can include poor performance, difficulty starting, hesitation or incorrect gauge readings.
Mögliche Ursachen
- Low battery voltage at start-up
- Faulty control module
Was Sie tun können
- 1Check that the battery is in good condition and that the terminals and earth connections are tight
- 2With a diagnostic tool, cycle the ignition once, read the codes again and check whether the code was active in the last cycle
- 3If the code was not active during the last operating cycle it is intermittent and needs no action
- 4If the code was active in this cycle, have a workshop with diagnostic equipment check the module and replace it if needed
Symptome, die Sie bemerken können5
- The car performs poorly and lacks power, especially when pulling away
- The engine does not start, or cranks without starting
- The car hesitates, surges or feels jerky during acceleration
- Cruise control cannot be engaged
- Gauges show wrong readings or do not work
Was der Fehler beeinflussen kann1
- The functions of the central electronic module (CEM) are restricted
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.