VOLVO
CEM-U300094 - Control Module. Component Failures. Unexpected operation
System
Zentralelektronik (CEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleV40 (2013–), V40 Cross Country (2013–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
On the V40, the CEM has rebooted too often within a single operating cycle, which shows unexpected behaviour in the module. The code does not necessarily mean a hardware fault, since low battery voltage can also set it. The symptoms are similar to other CEM faults, such as poor performance, hesitation and gauge faults.
Mögliche Ursachen
- An intermittent code is unlikely to point to a hardware fault in the module
- Low battery voltage can cause the code to be set
- The control module is damaged
Was Sie tun können
- 1Check that the battery is in good condition and the terminals are tight
- 2With a diagnostic tool, cycle the ignition once, read the codes again and check whether the code was active in the last cycle
- 3If the code was not active during the last operating cycle it is intermittent and needs no action
- 4If the code was active in this cycle, have a workshop with diagnostic equipment check the module and replace it if needed
Symptome, die Sie bemerken können5
- The car performs poorly and lacks power, especially when pulling away
- The engine does not start, or cranks without starting
- The car hesitates, surges or feels jerky when driving
- Cruise control cannot be engaged
- Gauges show wrong readings or do not work
Was der Fehler beeinflussen kann1
- The functions of the central electronic module (CEM) are restricted
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.