Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    CEM-U300801
    VOLVO

    CEM-U300801 - Control Module Ground "A". General Failure Information. General electrical failure

    System

    Zentralelektronik (CEM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    4 Modelle

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (4)
    • Volvo S80 (2007–)2007–2010
    • Volvo V70 (2008–)2008–2010
    • Volvo XC60 (2009–)2009–2010
    • Volvo XC70 (2008–)2008–2010

    Was bedeutet der Fehlercode?

    The CEM has two earth connections, one for electronics and one for power. The fault is stored when the electronics earth has no connection to the car body, which can make some functions, such as the instrument panel, stop working.

    Mögliche Ursachen

    • Contact resistance or oxidation in the terminals
    • Open circuit in the earth cable

    Was Sie tun können

    1. 1Check the earth connection at the module and at the body: it should be tight and free from rust and dirt
    2. 2Follow the earth cable from the module to the body and look for breaks, chafing and loose connectors
    3. 3Use a multimeter to check that the earth cable is connected to the body; if it is not, have a workshop repair the connection
    4. 4Reconnect connectors and components, switch the ignition on and check that the instrument panel works as it should
    5. 5Clear the code and road test; if it returns, have a workshop check the body earth connection

    Symptome, die Sie bemerken können3

    • The combined instrument panel does not work
    • The front seat power adjustment does not work
    • The passenger compartment lighting does not work

    Was der Fehler beeinflussen kann3

    • The function turns off during the driving cycle in which the fault is detected
    • If the fault stays present over many driving cycles the function is switched off permanently
    • Erasing the trouble codes and starting a new driving cycle resets the function

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.