VOLVO
CPM-5101 - Control module. Over heated
System
Verbrennungsheizung (CPM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (5)
Was bedeutet der Fehlercode?
The CPM has registered that the temperature inside the heater has become too high, so the code is set. The heater cannot be activated until the code has been cleared. The cause may be a damaged thermostat or sensor, a damaged water pump, or air and a leak in the cooling system.
Mögliche Ursachen
- Damaged overheat protection thermostat
- Damaged coolant temperature sensor
- Air or leakage in the cooling system
- Damaged water pump
Was Sie tun können
- 1Check the coolant hoses for damage and leaks before clearing the code
- 2If you have a diagnostic tool, activate the water pump and listen for a buzzing sound; if it does not start, the pump is suspect
- 3If you have a diagnostic tool, read the temperatures at the overheat protection thermostat and the coolant temperature sensor and note the values for the workshop
- 4Clear the code and start the heater again once the hoses and pump have been checked
- 5If the fault returns, have a workshop measure the resistances and check the heater
Symptome, die Sie bemerken können2
- Poor heating in the passenger compartment
- The parking heater does not work
Was der Fehler beeinflussen kann1
- The heater cannot be activated until the fault code has been cleared
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.