VOLVO
CRM-2063 - Position encoder 2, rear roof. Invalid position
System
Fahrwerk (Bremsen, Lenkung, Federung)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellC70 (2006–2013)
Modelle nach Baujahr und Motor anzeigen (1)
Was bedeutet der Fehlercode?
The convertible roof control module has registered that position sensor 2 in the rear roof section shows a position that does not match the expected one, or that the voltage to the sensor is outside the approved range. The sensor is then working poorly or is incorrectly fitted. The roof may be operated only in a limited way or not at all.
Mögliche Ursachen
- Position sensor not working
- Position sensor incorrectly fitted
Was Sie tun können
- 1With the ignition on, run the roof back and forth and see whether it moves evenly in both directions.
- 2Look for wear and signs that position sensor 2 is damaged.
- 3Check that position sensor 2 is correctly fitted and secure.
- 4If the sensor is damaged or incorrectly fitted and cannot be put right, have a workshop replace or correct it.
Symptome, die Sie bemerken können1
- No or limited roof operation
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.