VOLVO
CRM-2102 - Hall sensor 9. Short to GND, disconnected or internal error
System
Fahrwerk (Bremsen, Lenkung, Federung)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellC70 (2006–2013)
Modelle nach Baujahr und Motor anzeigen (1)
Was bedeutet der Fehlercode?
Hall sensor 9 draws more current than normal, and no sensor pulse appears when the hydraulic pump for the roof runs. The fault can be caused by the signal wire being shorted to ground, a broken connector between the sensor and the control module, or an internal fault in the sensor or in the roof control module.
Mögliche Ursachen
- The signal wire is shorted to ground
- Broken connector between hall sensor 9 and the roof control module
- Internal fault in hall sensor 9
- Internal fault in the roof control module (CRM)
Was Sie tun können
- 1Read out and clear the fault code, test the roof and see whether the fault returns
- 2Check that the connector to hall sensor 9 is firmly fitted and free from oxidation and play
- 3With a multimeter you can check that the wire from the sensor has no break or short to ground
- 4Repair a damaged wire. If no fault is found there, hall sensor 9 may need replacing by a workshop
- 5If the fault remains, a workshop needs to check the roof control module
Symptome, die Sie bemerken können2
- No or limited roof operation
- Message in the text display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.