VOLVO
CRM-6011 - Valve 1. Signal too high/signal too low
System
Fahrwerk (Bremsen, Lenkung, Federung)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellC70 (2006–2013)
Modelle nach Baujahr und Motor anzeigen (1)
Was bedeutet der Fehlercode?
The signal to hydraulic valve 1 is too high or too low. The fault arises when the wire between the roof control module (CRM) and the hydraulic valve has an open circuit or is shorted to ground or voltage, or when the valve itself does not work. The movement of the roof may then be limited.
Mögliche Ursachen
- Open circuit in the wire between the roof control module and the hydraulic valve
- The wire between the roof control module and the hydraulic valve is shorted to ground or voltage
- The hydraulic valve does not work, with an internal short to ground
- Internal fault in the roof control module (CRM)
Was Sie tun können
- 1Read out and clear the fault code, test the roof and see whether the fault comes back
- 2Check only the wires to the hydraulic valve that the fault code refers to
- 3With a multimeter you can check the wires for an open circuit and for a short to ground or voltage
- 4If a fault is found in the wire, replace the wire. If nothing is found, the hydraulic pump may need replacing by a workshop
- 5If the fault remains, a workshop needs to check the roof control module
Symptome, die Sie bemerken können2
- No or limited roof operation
- Message in the text display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.