VOLVO
DCDC-P060400 - Internal Control Module Random Access Memory (RAM) Error. General Failure Information. No sub type information
System
Unbekanntes System / Herstellerspezifisch
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The DC/DC converter control module has found an internal fault in its RAM memory, and the fault code is set when the module runs its memory check. The fault means the high voltage battery does not charge and forces hybrid mode. The fault is inside the control module itself.
Mögliche Ursachen
- The control module has an internal memory fault
Was Sie tun können
- 1Switch the ignition off, wait a moment, switch it on again, then see whether the fault code returns
- 2If the fault remains, a workshop should replace the DC/DC converter control module (DCDC)
- 3As DCDC is part of the high voltage system, it may only be replaced or worked on by trained staff in a workshop
Symptome, die Sie bemerken können3
- Text message and warning symbol in the display
- The high voltage battery does not charge while driving
- The PURE, SAVE and AWD drive modes disengage automatically or are not available
Was der Fehler beeinflussen kann2
- The high voltage battery does not charge
- Hybrid driving mode is forced
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.