VOLVO
DCDC-P060B00 - Internal Control Module A/D Processing Performance. General Failure Information. No sub type information
System
Unbekanntes System / Herstellerspezifisch
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
An internal A/D converter in the DC/DC converter control module has failed its own test. A/D converters turn measured signals into values the control module can use. The fault therefore lies in the control module, the high voltage battery does not charge, and hybrid mode is forced.
Mögliche Ursachen
- Internal fault in the control module
Was Sie tun können
- 1Switch the ignition off and then on again, and see whether the fault code comes back
- 2If the fault remains, a workshop should replace the DC/DC converter control module (DCDC)
- 3As DCDC is part of the high voltage system, work on it may only be carried out by trained staff in a workshop
Symptome, die Sie bemerken können3
- Text message and warning symbol in the display
- The high voltage battery does not charge while driving
- Hybrid mode is used often or all the time
Was der Fehler beeinflussen kann2
- The high voltage battery does not charge
- Hybrid driving mode is forced
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.