Was bedeutet der Fehlercode DCDC-P062F00?

Diagnose und Fehlercodedefinition für DCDC-P062F00 (Volvo V60 (2011–), Volvo V60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

DCDC-P062F00 - Internal Control Module EEPROM Error. General Failure Information. No sub type information

System

Unbekanntes System / Herstellerspezifisch

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

1 Modell

V60 (2011–)

Modelle nach Baujahr und Motor anzeigen (2)

Was bedeutet der Fehlercode?

The DC/DC converter control module has found an internal fault in its EEPROM memory, the memory where it keeps stored data. The module checks its own internal memory and only stores the code once the fault is confirmed. The fault is inside the module's own memory rather than in the wiring around it. Because the converter is part of the high voltage system, charging of the high voltage battery is affected.

Mögliche Ursachen

Internal fault in the control module's EEPROM memory

Was Sie tun können

1Switch the ignition off, wait a moment and switch it on again. Check whether the warning goes out
2Read and clear the code with your own tool, then drive the car briefly to see whether it comes back
3If the fault returns, have a workshop check and replace the control module, since the fault is in the module's own memory
4The high voltage system may only be handled by qualified personnel. Do not make any changes to the control module or its wiring yourself

Symptome, die Sie bemerken können4

Warning symbol with a message in the display
Charging of the high voltage battery is absent or reduced while driving
Drive modes PURE, SAVE and AWD disengage automatically or are not available
The combustion engine runs all the time or too often in HYBRID mode

Was der Fehler beeinflussen kann2

The high voltage battery is not charged
Hybrid drive mode is forced

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.