VOLVO
DCDC-P0A081C - DC/DC Converter Status Circuit/Open. General Electrical Failures. Circuit voltage out of range
System
Unbekanntes System / Herstellerspezifisch
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The DC/DC converter control module has found that a status circuit in the converter is open, or that the voltage in it is outside the permitted range. The cause may be a break in the signal wire or an incorrect supply voltage. The code is tested when the ignition is switched on and is only stored once the fault is confirmed. Because the converter is part of the high voltage system, charging of the high voltage battery is affected.
Mögliche Ursachen
- Break in the signal wire
- Incorrect supply voltage to the control module
Was Sie tun können
- 1Restart the system by switching the ignition off and on again, then see whether the code comes back
- 2Check that the ordinary battery is charged and that its terminals are tight and clean, since weak voltage in the electrical system can affect the converter
- 3Have a workshop check the supply to the DC/DC converter and its ground point for breaks, contact resistance and oxidation
- 4The high voltage system may only be handled by qualified personnel. Do not work on the converter's wiring or connections yourself
Symptome, die Sie bemerken können4
- Warning symbol and message in the display
- The high voltage battery does not charge, or charging is reduced while driving
- The high voltage battery discharges or charges poorly
- Drive modes PURE, SAVE and AWD disengage automatically or cannot be selected
Was der Fehler beeinflussen kann2
- The high voltage battery is not charged
- Hybrid drive mode is forced
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.