Was bedeutet der Fehlercode DCDC-P0A0849?

Diagnose und Fehlercodedefinition für DCDC-P0A0849 (Volvo V60 (2011–), Volvo V60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

DCDC-P0A0849 - DC/DC Converter Status Circuit/Open. System Internal Failures. Internal electronic failure

System

Unbekanntes System / Herstellerspezifisch

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

1 Modell

V60 (2011–)

Modelle nach Baujahr und Motor anzeigen (2)

Was bedeutet der Fehlercode?

The DC/DC converter control module has found that its internal checks have failed, which points to an electronic fault in the module itself. The code therefore concerns the control module rather than the wiring around it. The code is only stored once the fault is confirmed. Charging of the high voltage battery is affected.

Mögliche Ursachen

Internal electronic fault in the control module

Was Sie tun können

1Switch the ignition off, wait a moment and switch it on again. Check whether the code has gone
2Read and clear the code, then drive the car for a while to see whether it returns
3If the fault remains, have a workshop check the control module and its power supply, and replace the module if needed
4The high voltage system may only be handled by qualified personnel. Do not make any changes to the control module or its wiring yourself

Symptome, die Sie bemerken können4

Warning symbol and message in the display
The high voltage battery does not charge or charges poorly
Drive modes PURE, SAVE and AWD disengage automatically or cannot be selected
The combustion engine runs all the time in HYBRID mode

Was der Fehler beeinflussen kann2

No charging of the high voltage battery
Hybrid drive mode is forced

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.