VOLVO
DCDC-P0A0913 - DC/DC Converter Status Circuit Low. General Electrical Failures. Circuit open
System
Unbekanntes System / Herstellerspezifisch
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The DC/DC converter control module has registered that its status circuit is too low, and the fault concerns an open circuit. The causes may be a short to ground, a break or short in the connections, or corrosion at wire lugs and screw heads. The code is tested when the ignition is switched on and is only stored once the fault is confirmed. Charging of the high voltage battery is affected.
Mögliche Ursachen
- Short circuit to ground
- Short circuit or open circuit in the connections
- Corrosion at wire lugs and screw heads
Was Sie tun können
- 1Switch the ignition off and on again. Check whether the code comes back after the restart
- 2Have a workshop check the ground point, which should be tight and free from corrosion, since a poor ground connection can cause this fault
- 3Have a workshop check the connections and wiring to the converter for breaks, contact resistance and oxidation, and look for a short to ground
- 4The high voltage system may only be handled by qualified personnel. Do not work on the wiring or connectors yourself
Symptome, die Sie bemerken können4
- Warning symbol and message in the display
- Charging of the high voltage battery is absent or reduced while driving
- The high voltage battery discharges or charges poorly
- Drive modes PURE, SAVE and AWD disengage automatically or cannot be selected
Was der Fehler beeinflussen kann2
- No charging of the high voltage battery
- Hybrid drive mode is forced
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.