VOLVO
DCDC-U000100 - High Speed CAN Communication Bus. General Failure Information. No sub type information
System
Unbekanntes System / Herstellerspezifisch
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The DC/DC converter control module has lost contact with the other control modules on the high speed CAN bus. The modules exchange information continuously, and when replies fail to arrive within the time limit the code is set. The fault is generic and gives no further detail. The cause may be a break in the bus or CAN wires shorted to voltage or ground. Charging of the high voltage battery is affected.
Mögliche Ursachen
- Break in the CAN bus
- CAN wires shorted to voltage or ground
Was Sie tun können
- 1Switch the ignition off, wait a moment and switch it on again, then check whether the warning returns
- 2If several control modules show faults at the same time, the problem may be on the bus rather than in the converter module
- 3Have a workshop check the CAN wiring and the connectors to other control modules for breaks and for short circuits to voltage or ground
- 4The high voltage system may only be handled by qualified personnel. Do not work on the CAN wiring or the converter's wiring yourself
Symptome, die Sie bemerken können4
- Warning symbol and message in the display
- Charging of the high voltage battery is absent or reduced while driving
- Drive modes PURE, SAVE and AWD disengage automatically or cannot be selected
- Hybrid mode is forced and the combustion engine runs too often
Was der Fehler beeinflussen kann2
- No charging of the high voltage battery
- Hybrid drive mode is forced
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.