VOLVO
DCDC-U300100 - Control Module Improper Shutdown. General Failure Information. No sub type information
System
Unbekanntes System / Herstellerspezifisch
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The DC/DC converter control module has registered that it did not shut down correctly when the ignition was switched off. The fault lies in the control module itself, and the code can be set the next time the ignition is switched on. The fault is generic and gives no further detail on its type. The driver normally notices nothing, but the code should be followed up if it returns.
Mögliche Ursachen
- Internal fault in the control module
Was Sie tun können
- 1Switch the ignition off, wait a moment and switch it on again, then check whether the code comes back
- 2Read and clear the code with your own tool, and see whether it returns after the next shutdown
- 3If the fault remains, have a workshop check the control module and replace it
- 4The high voltage system may only be handled by qualified personnel. Do not make any changes to the converter yourself
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.