VOLVO
DCDC-U300168 - Control Module Improper Shutdown. Algorithm Based Failures. Event information
System
Unbekanntes System / Herstellerspezifisch
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellV60 (2011–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The DC/DC converter control module has registered an incorrect internal event in its own functions. This is an internal fault in the control module, and the code mainly gives information about the event. The fault is generic and gives no further detail on its type. The driver normally notices nothing, but the code should be followed up if it returns.
Mögliche Ursachen
- Internal fault in the control module
Was Sie tun können
- 1Restart the control module by switching the ignition off and on, then check whether the code is still present
- 2Read and clear the code with your own tool, and see whether it returns after a few drives
- 3If it returns, have a workshop check the control module and replace it
- 4Work on the control module or its wiring is for qualified high voltage personnel only
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.