VOLVO
DDM-0027 - LED, camera module Open circuit
System
Fahrertürmodul (DDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (5)
Was bedeutet der Fehlercode?
The driver's door control module has registered a break in the supply wire to the LED in the camera module of the driver's side door mirror. The LED may also be without a connection, in which case it will not light. A message may appear in the text display.
Mögliche Ursachen
- Break in the supply wire
- LED not connected
Was Sie tun können
- 1Start the engine and check whether the LED flashes three times when the BLIS system is activated
- 2Switch the ignition off, then check that the LED is properly connected and intact
- 3Have a workshop check the supply wire for breaks, contact resistance and oxidation
- 4If the fault does not return, no further action is needed, as it was most likely intermittent
Symptome, die Sie bemerken können2
- The LED does not light
- Message in the text display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.