VOLVO
DDM-0049 - Control module. Internal fault
System
Fahrertürmodul (DDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (5)
Was bedeutet der Fehlercode?
The door module has flagged an internal fault, since a signal was not refreshed within a set time. The control module then goes into its limp-home mode, and the power window and door mirror control do not work.
Mögliche Ursachen
- Internal fault in the door module
Was Sie tun können
- 1Read out and note the fault code, clear it, then run a test drive to see if it returns
- 2Bring the window to its upper limit by hand and start an initialization. From model year 2003 the window only lowers a short way before rising
- 3After initialization, check that the window raises and lowers normally with the switch
- 4If the fault remains, have a workshop replace the door module. A new module is delivered without software and must be programmed
Symptome, die Sie bemerken können2
- The power window mechanism does not operate
- Door mirror control does not function
Was der Fehler beeinflussen kann1
- The control module's limp-home program has started
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.