Was bedeutet der Fehlercode DDM-6E02?

Diagnose und Fehlercodedefinition für DDM-6E02 (Volvo C30 (2007–2013), Volvo C30 Electric (2011–2013), Volvo C70 (2006–2013)). Steuergerätereparatur bei OBD Tuning.

VOLVO

DDM-6E02 - Mirror motor. Ground (GND) short

System

Fahrertürmodul (DDM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

5 Modelle

C30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Modelle nach Baujahr und Motor anzeigen (5)

Was bedeutet der Fehlercode?

The fault is stored when the power door mirror motor for upward movement is activated while the control module registers a short to ground in the signal cable. Door mirror control then does not function.

Mögliche Ursachen

Short-circuit to ground in the signal cable for mirror up and down movement

Was Sie tun können

1Read out and note the fault code, clear it, then check that the mirror moves when the switch is used
2With ignition off, use a multimeter to confirm the signal cable has no contact with ground (body). Replace the cable if it is damaged
3Check the connectors in the mirror and in the harness for oxidation and loose contacts
4If you have a diagnostic tool, activate upward mirror movement and listen for the motor to run
5If no fault is found, have a workshop try a new power door mirror

Symptome, die Sie bemerken können1

Door mirror control does not function

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.