VOLVO
DDM-B108F23 - Cabin Lock/Unlock Switch. General Signal Failures. Signal stuck low
System
Fahrertürmodul (DDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The door module monitors the central lock button in the cabin. The fault is stored when the button has stayed pressed for a long time, because the signal then stays low. Central locking then does not work at all.
Mögliche Ursachen
- The central lock button has jammed in the pressed position
- Damaged control panel
Was Sie tun können
- 1Read out and note the fault code, clear it, then press the central lock button once to see if it returns to its position
- 2Check that the button is not stuck in the pressed position and that it moves freely when pressed and released
- 3If you have a diagnostic tool, check in live data whether the central lock button signal shows as pressed when the button is released
- 4If the button is stuck or broken, have a workshop replace the control panel
Symptome, die Sie bemerken können1
- Central locking does not operate at all
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.