VOLVO
DDM-B10EB11 - Driver door double locking motor. General Electrical Failures. Circuit short to ground
System
Fahrertürmodul (DDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The door module powers the lock motor for the blocked lock position in the driver's door, and the output signal is too low. The fault is caused by the supply cable being short-circuited to ground. The code is always set together with a matching fault code for mirror folding, because they share a wire inside the module.
Mögliche Ursachen
- Supply cable short-circuited to ground
- Moisture and/or oxidation in connections
Was Sie tun können
- 1Read out the fault codes, clear them and check whether they return. Also trace any fault code for mirror folding
- 2Test the locking functions with the buttons and controls and note what does not work
- 3With ignition off, use a multimeter to confirm the supply cable to the lock motor has no contact with ground (body). Replace the cable if it is damaged
- 4Check the connectors in the driver's door for moisture and oxidation, and clean them
- 5If the fault remains, have a workshop check the door module and the lock motor
Symptome, die Sie bemerken können4
- Does not lock to the deadlock position
- Central locking does not work
- Electric door mirror adjustment does not work
- Door mirror folding does not work
Was der Fehler beeinflussen kann1
- Mirror folding and power adjustment are blocked to prevent the car from being locked by accident
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.