VOLVO
DDM-B118A29 - Rear Window Position Sensor. General Signal Failures. Signal signal invalid
System
Fahrertürmodul (DDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The window lifts in the rear doors have Hall sensors that measure how fast each window turns, and the window position is determined from this. The fault is stored when the sensor signal is incorrect, and automatic closing of the rear door windows then does not work.
Mögliche Ursachen
- Damaged Hall sensor
- Signal cable short-circuited to voltage
- Signal cable short-circuited to ground
- Break in the signal cable
Was Sie tun können
- 1Clear the fault code and check with the switch whether the rear door window can be run fully up and down
- 2Check that the rear door window moves freely and is not stiff
- 3With ignition off, use a multimeter to check that the signal cable to the rear door sensor has no contact with voltage or ground. Replace the cable if it is damaged
- 4Check the connectors at the rear door window lift for oxidation and loose contacts
- 5If the fault remains, have a workshop check the Hall sensor in the rear door window lift
Symptome, die Sie bemerken können1
- Auto-close function of windows does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.