VOLVO
DDM-B11B815 - Driver Blind Spot Warning Indicator Supply. General Electrical Failures. Circuit short to battery or open
System
Fahrertürmodul (DDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The fault is stored when the output signal to the driver-side camera is too high. On cars with the blind spot system (BLIS) a camera is fitted in each external mirror. The cause can be a supply cable short-circuited to voltage or an open circuit, and the LED then does not light.
Mögliche Ursachen
- Supply cable short-circuited to voltage
- Open circuit in the supply cable
Was Sie tun können
- 1Read out and note the fault code, clear it, then test drive the car to see if it returns
- 2With ignition off, use a multimeter to check that the supply cable to the camera has no contact with plus and is not broken. Replace the cable if it is damaged
- 3Check the connectors in the driver's side mirror for oxidation and loose contacts
- 4If you have a diagnostic tool, activate the blind spot system on the driver's side and check whether the camera responds
- 5If no fault is found, have a workshop check the camera in the driver's side mirror
Symptome, die Sie bemerken können2
- LED does not light
- A message appears in the information display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.