VOLVO
DDM-B1B7086 - LIN Bus Circuit #2. Bus Signal / Message Failures. Signal invalid
System
Fahrertürmodul (DDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
The driver door module communicates over LIN bus 2 with the modules for the cameras on the left and right sides of the car. The fault is stored when a signal from the cameras is incorrect, and the cause lies in the module that sends the signal rather than in the driver door module.
Mögliche Ursachen
- The cause lies in the sending module, that is the camera on the left or the right side
Was Sie tun können
- 1Read and clear the code, road test and see whether it returns
- 2Check that the fuses are intact
- 3Check that the connectors to the cameras are free from moisture and oxidation
- 4If the fault remains, have a workshop with diagnostic equipment determine which camera gives the faulty signal and repair it
Symptome, die Sie bemerken können1
- An LED does not light up
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.