VOLVO
DDM-DD22 - LIN communication camera module Internal fault
System
Fahrertürmodul (DDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (5)
Was bedeutet der Fehlercode?
The driver door module communicates over LIN with the camera on the driver side of the car, which is part of the blind spot information system (BLIS). The fault is stored when the module registers an internal fault in the LIN communication with the camera, and the cause lies in the camera in the driver door.
Mögliche Ursachen
- Fault inside the driver-side camera
Was Sie tun können
- 1Check that the fuses are intact
- 2Start the engine and check that the LEDs in the blind spot system flash when the system is activated
- 3Check that the connectors at the camera are secure and free from moisture
- 4If the fault was stored once and does not return, no action is needed
- 5If the fault remains, have a workshop with diagnostic equipment replace the camera on the affected side
Symptome, die Sie bemerken können2
- An LED does not light up
- A message is shown in the text display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.