VOLVO
DDM-DD30 - Communication with camera module Internal Fault
System
Fahrertürmodul (DDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (5)
Was bedeutet der Fehlercode?
The driver door module communicates over LIN with the camera in the driver door, which is part of the blind spot information system (BLIS). The fault is stored when the module registers that communication with the camera is not possible, and the cause is an internal fault in the camera.
Mögliche Ursachen
- Fault inside the driver-side camera
Was Sie tun können
- 1Check that the fuses are intact
- 2Start the engine and see whether the LEDs flash when the blind spot system is activated
- 3Inspect the wires between the driver door and the camera for chafing and visible damage
- 4If the code does not return after a road test, no action is needed, as it was most likely temporary
- 5If the fault remains, have a workshop with diagnostic equipment replace the camera
Symptome, die Sie bemerken können2
- An LED does not light up
- A message is shown in the text display
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.