Was bedeutet der Fehlercode DDM-E003?

Diagnose und Fehlercodedefinition für DDM-E003 (Volvo S60 (2001–2009), Volvo S80 (1999–2006), Volvo V70 (2000–2008)). Steuergerätereparatur bei OBD Tuning.

VOLVO

DDM-E003 - Configuration fault. Faulty configuration

System

Fahrertürmodul (DDM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

5 Modelle

S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

Modelle nach Baujahr und Motor anzeigen (5)

Was bedeutet der Fehlercode?

The driver door module compares its own configuration ID with the configuration that the central electronic module (CEM) sends out on the CAN network. The fault is stored when they do not match, or when communication with the CEM is interrupted. It can occur if the module is not intended for this particular car, for example if it is second-hand and has different software or hardware.

Mögliche Ursachen

Incorrect CAN configuration ID, because the module is not intended for this car
Open circuit in the CAN wires between the module and the central electronic module (CEM)

Was Sie tun können

1Read the codes in the central electronic module (CEM) and diagnose them first
2Check that the fuses are intact
3If the module has been replaced or is second-hand, this is an important clue, because a module from another car may have the wrong software
4Check that the wires between the driver door and the CEM show no visible damage and that the connectors are secure
5If the fault remains, have a workshop load the correct software into the module, or replace the module if it is damaged

Symptome, die Sie bemerken können3

The control panel in the driver door does not work
The automatic closing of the windows does not work
The car cannot be operated with the remote control

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.