VOLVO
DDM-U040200 - Invalid Data Received from TCM. General Failure Information. No sub type information
System
Fahrertürmodul (DDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
Modelle nach Baujahr und Motor anzeigen (5)
Was bedeutet der Fehlercode?
The driver and passenger door module (DDM/PDM) receives the selected gear from the transmission control module (TCM) and has found that this information is of too low quality to use. The code is a follow-on: it was stored because the fault lies in another module, so the transmission control module must be repaired first. The code can then be erased.
Mögliche Ursachen
- Fault in the transmission control module (TCM) sending gear information of too low quality
Was Sie tun können
- 1Read and note the codes stored in all control modules, so you can see which ones are stored together with this one
- 2Check that the fuses are intact and that the battery is well charged
- 3Start with the repair of the transmission control module (TCM), since this code only shows that the information from it is too poor
- 4If you have a diagnostic tool, read the gear value that the TCM reports in live data and check that it changes when you change gear
- 5Erase the code only once the fault in the transmission control module has been repaired, then road test the car to see whether it returns
- 6If the code returns, have a workshop with diagnostic equipment check the transmission control module
Symptome, die Sie bemerken können1
- Electric adjustment of the door mirrors does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.