VOLVO
DDM-U201444 - Control Module Hardware. System Internal Failures. Data memory failure
System
Fahrertürmodul (DDM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The driver or passenger door module (DDM/PDM) has found an internal fault in its own components, including its data memory. The fault lies in the module itself and not in the wiring around it. If the fault has only occurred once it may be temporary, but if it returns the module is faulty and must be replaced.
Mögliche Ursachen
- Damaged driver or passenger door module
Was Sie tun können
- 1Read and erase the code, then road test to see whether it returns
- 2Check that the fuses are intact and that the battery is well charged
- 3Test the window lift and the door mirrors in the driver door and check that they work as normal after switching the ignition off and on
- 4If the fault is still there or the code returns, have a workshop with diagnostic equipment check the module, as it is probably faulty and needs replacing
- 5After a module replacement the window position must be initialised, which a workshop should do
Symptome, die Sie bemerken können4
- Electric window lift does not work
- The window lift is inoperative, reduced or behaves incorrectly
- Folding of the door mirrors does not work
- Automatic memory adjustment of the door mirrors does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.