VOLVO
DEM-P066615 - PCM / ECM / TCM Internal Temperature Sensor Circuit. General Electrical Failures. Circuit short to battery or open
System
Allradantrieb (DEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo S60 (2011–)2011–2012
- Volvo S80 (2007–)2007–2012
- Volvo V60 (2011–)2011–2012
- Volvo V70 (2008–)2008–2012
- Volvo XC60 (2009–)2009–2012
- Volvo XC70 (2008–)2008–2012
- Volvo XC90 (2003–)2009–2010Nur Motor: B6324S, B8444S · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2012Nur Motor: B6324S5 · Nur Getriebe: TF-80SC AWD
- Volvo XC90 (2003–)2013–2014Nur Motor: B6324S5, D5244T18 · Nur Getriebe: TF-80SC AWD
Was bedeutet der Fehlercode?
The module monitors whether the oil temperature sensor signal stays at a sensible level. The code is stored when the signal is missing or too low, which can be caused by a break or a short to voltage in the signal wire, or by a damaged sensor. The four-wheel drive is disengaged while the fault is present.
Mögliche Ursachen
- Contact resistance and oxidation in the connectors
- Break or short to voltage in the signal wire
- Damaged oil pressure and oil temperature sensor
- Damaged temperature sensor in the control module
- Damaged four-wheel drive control module (DEM)
Was Sie tun können
- 1Read and erase the code, then road test to see whether it returns
- 2Check that the fuses are intact
- 3Check the connector to the oil temperature sensor for oxidation and loose contacts, and look for chafing or pinching in the wire
- 4Use a multimeter to check that the signal wire has no contact with battery voltage when it is disconnected at both ends
- 5If the code returns, have a workshop with diagnostic equipment check the sensor and replace the four-wheel drive control module if needed
Symptome, die Sie bemerken können2
- The four-wheel drive does not work
- Warning symbol and message in the display
Was der Fehler beeinflussen kann1
- The four-wheel drive is disengaged
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.